Industrial Mechanic Career Guide and Counseling

Question: what doesn't that mean mechanic industrial? i would like to know what they do in mechanic industrial

Answer: We service, maintain, and repair industrial machinery and equipment for production plants, amusement parks, etc. Knowledge in mechanical, electrical, and fabrication is a must! Knowledge in automation, controls, hvac, and computers is a plus.

Question: what is the pay of a industrial mechanic?

Answer: The best place to find ACCURATE, current pay information for any job is the U.S. Department of Labor's "2006-2007 Occupational Outlook Handbbok." Here is what the most recent pay looks like: Median hourly earnings of industrial machinery mechanics were $18.78 in May 2004. The middle 50 percent earned between $15.09 and $22.95. The lowest 10 percent earned less than $12.14, and the highest 10 percent earned more than $27.59. Machinery maintenance workers earned less than the higher skilled industrial machinery mechanics. Median hourly earnings of machinery maintenance workers were $15.79 in May 2004. The middle 50 percent earned between $12.21 and $20.18. The lowest 10 percent earned less than $9.60, and the highest 10 percent earned more than $24.59. Earnings vary by industry and geographic region. Median hourly earnings in the industries employing the largest numbers of industrial machinery mechanics in May 2004 are: ---Electric power generation, transmission and distribution: $25.78 ---Motor vehicle parts manufacturing: $21.79 ---Plastics product manufacturing: $18.04 ---Machinery, equipment, and supplies merchant wholesalers: $17.74 ---Commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance: $16.93 Click here for total information about this carer field: http://www.bls.gov/oco/ocos191.htm

Question: where do i find a listing of industrial maintenance mechanic job openings in tennessee?

Answer: Try a seach on the web for the Tennessee Department of Labor. They probably have a web site where you can look and post a resume for a job.

Question: Which would be the best course after ITI(Industrial Trainning Institute) Electronic Mechanic diploma?

Answer: Just fix with what course u had done in ITI . if u have done electronics in ITI. than go for the same in diploma..it make sense. even i had done the same, and u will have more knowldge on one particular subject.. All the Best

Question: I am an experienced industrial maintenance mechanic and want to relocate to Hot Springs, AR? Can you help me? I am a very experienced Industrial maintenance mechanic. I am experienced in welding. I have a fork lift drivers license. I am experienced in hydraulics. I can been licensed at driving an 18 wheeler. I worked at Exxon refinery hauling pipes. Can you help me find a job in Hot Springs, Arkansas. I am currently employed and have worked at the same job for 15 years. I am currently the Safety inspector, also, where I now work. I have excellent references. I am 49 years old and am a legal citizen of the U.S.A. I was born in Nicaragua. I am married with 2 children under 8 years old.

Answer: Hot Springs is beautiful. It is a very small town with few jobs, especially in this economy. I recommend that you stay where you are for the next two years, unless your job is going away. It is a terrible time to be changing jobs!

Question: Why there is a big lacking of industrial maintenance mechanics in California?

Answer: i did a search on the occupational handbook. put out the government. they cover all jobs and give information on these jobs. the job you are asking about is not listed in any form, industrial maintenance mechanics, industrial mechancs or maintenance mechanics. the job listed are in the offical job titles go to the site and check it out : (1) To find out about a specific occupation or topic, use the Search box that is on every page—enter your search term in the box. (2) To find out about many occupations, browse through listings using the Occupations links that are on the right side of each page. (3) For a listing of all occupations in alphabetical order, go to the A-Z Index and select a letter.

Question: Is my knuckle tattoo going to be damged working as a mechanic? Im planning on getting a knuckle tattoo soon and i wanted to know if working as a mechanic would fade it or damage it. I use industrial sanded soap and scrub. tags: meachanic, knuckle,tattoo,damage

Answer: yeah, i bet you it will, both my dad and bf are mechanics, you'll have constant cuts and nicks on your hands, so therefore i doubt that a tattoo would stay in great condition. the soap shouldn't bother it once its healed, but when your working it would be less safe unless you constantly wear something like mechanix brand gloves which protect your hands.

Question: During the industrial revolution, what key mechanical engineering principles were key to the era? In my view, the developments in fluid mechanics and thermodynamics, particularly those governing rotary motion of steam turbines, where the most productive. It also paved the way for early steam rail transport and power generation. However, the development of many theories in solid mechanics were equally important to the building of Victorian bridges and structures. Newton's/Leibniz's Calculus could also be argued to be the single most important scientific principle - as the aforementioned theories were formed on this basis. What, in your opinion were the key theories in the onset of the Industrial Age?

Answer: The main principle was the application of physics and mathematics to the design and manufacture of machines, products and factories. Everyone should note the question is about principles and not inventions, social orders, etc.

Question: Does anyone know the award wage for a mechanic NSW? Just wondering what the award wage per week for a motor mechanic in NSW is i cant understand the industrial relations website any help would be great thanks.

Answer: Award rates as from 27th March 2006 and contact phone number http://www.industrialrelations.nsw.gov.a…

Question: HOW CAN I CHARGE AUTO BATTERIES WITHOUT A INDUSTRIAL CHARGER? Hello im train to start a small (Battery Refurbish business and I would like to know if I can use one of those small chargers found in mechanic shops, to charge the batteries after I have put the sulfuric acid. Or do I have to use one of those big Industrial chargers?

Answer: Yes, you can, but it is not a simple choice. The small chargers give about 4 or 5 amps and have no way of turning off when the battery is fully charged. Also their current decreases as the battery charges up so they take longer to charge a battery fully than their initial charge rate would suggest. . The big commercial ones can give a steady current at a selectable rate and some of them can detect when the battery is fully charged and cut off the power. They may also have digital voltage and current meters that are more accurate than the simple ammeter on the cheap chargers. So, you get what you pay for. Have a look at the specifications of the chargers you can find.